Kelowna Gutter Repairs
and Inspections

The decision to repair or replace aluminum gutters hinges on the system’s age, damage severity, and long-term cost-effectiveness. Aluminum gutters, known for their rust resistance and 20–30-year lifespan, often withstand minor issues but may require replacement if structural integrity is compromised.

Below, we analyze key factors to guide homeowners in Kelowna and similar climates.

When to Repair Aluminum Gutters

1. Localized Damage
   Small cracks (under ¼ inch), isolated leaks at seams, or minor dents can often be repaired. Clean the area with isopropyl alcohol, apply UV-resistant silicone sealant (e.g., GE Silicone 2), and reinforce with aluminum flashing if needed. Repair is ideal if damage is confined to one section, such as a single joint or downspout connection.
2. Loose Hangers or Sagging
   Gutters sagging due to loose hangers (not rotted fascia) can be stabilized by replacing old spikes with stainless steel screws and ferrules. Reinforce hangers every 2–3 feet for optimal support.
3. Recent Installation
   If gutters are less than 10 years old and otherwise functional, repairs are cost-effective. For example, resealing corners or adjusting pitch (¼ inch per 10 feet slope) restores performance without full replacement.

When to Replace Aluminum Gutters

1. Extensive Corrosion or Rust
   While aluminum resists rust, prolonged exposure to acidic debris (e.g., pine needles) or salt air near lakes like Okanagan can cause pitting and corrosion. If >30% of the system shows oxidation or thinning, replacement ensures long-term reliability.
2. Multiple Leaks or Seam Failures
   Recurring leaks at multiple seams or corners signal systemic failure. Seamless aluminum gutters eliminate 90% of leaks but cannot be retrofitted; full replacement is necessary.
3. Structural Compromise
   Sagging caused by rotted fascia, warped sections from ice dams, or separation from the roofline often requires replacement. Aluminum’s lightweight nature means severe warping cannot be reshaped effectively.
4. Age Over 20 Years
   Older systems become brittle, with faded coatings and weakened seams. Upgrading to 6-inch seamless aluminum improves drainage capacity and reduces maintenance.

Fascia boards provide the structural foundation for gutter systems. When rotted or cracked (common in older homes with wood fascia), they cannot support the gutter’s weight, leading to sagging or detachment. Repairs involve removing the gutter, replacing damaged fascia with pressure-treated lumber or PVC boards, and reinstalling the system using corrosion-resistant hangers. In cases of severe rot, technicians may install aluminum fascia wraps for added protection. Neglecting fascia issues compromises the entire gutter system, risking water infiltration into roof rafters and attic spaces.

Corners endure the highest stress due to water direction changes. Leaks occur when sealant degrades or miter joints separate from thermal expansion. Repair involves disassembling the corner, removing old adhesive, and reassembling it with polyurethane sealant for flexibility. Reinforcing the joint with stainless steel brackets or rivets adds stability. Chronic leaks may indicate improper slope, which increases water velocity and pressure at corners. Technicians re-pitch the gutter to ensure even flow distribution. For severe cases, replacing the corner with a seamless welded joint provides a permanent solution.

Post-repair, proactive maintenance is essential. Bi-annual cleanings remove leaves and debris, while gutter guards reduce clog frequency. Inspect hangers and seals annually, especially after extreme weather. Addressing minor issues promptly like resealing a small crack avoids costly emergencies. For homes in heavy rainfall or snow zones, upgrading to commercial-grade 6-inch gutters and 3x4-inch downspouts enhances durability. Regular professional inspections (every 2–3 years) catch hidden issues early, extending the system’s lifespan by decades.

Sagging gutters result from a combination of age-related wear, environmental stress, and material fatigue. Traditional spike-and-ferrule systems loosen over time due to thermal expansion, heavy debris loads, or rust. In colder climates like BC, freeze-thaw cycles exacerbate this by expanding ice, which warps gutters and pulls fasteners from fascia boards. Rotting fascia, common in older homes with wood trim, eliminates a secure anchor point, causing gutters to detach.

Multi-story homes or complex rooflines (e.g., multiple valleys or dormers) place additional strain on hangers, accelerating failure. Technicians address this by replacing outdated spikes with stainless steel screws, reinforcing fascia with durable materials like PVC or treated lumber, and installing hidden hangers spaced every 24 inches for optimal support. Ignoring sagging risks gutter collapse, which can damage roofing, siding, and even injure bystanders.

No. In order to ensure that our jobs run smoothly and we can provide our customers with manufacturer's warranties, we only install materials that we supply from our trusted wholesale.

Very rarely. After many years in our industry we are confident in our estimated prices. We always try to look at all different angles to see what could happen. If we feel that there may be some surprises that we just don’t see, we will always give you bracket pricing, i.e. $1500-$1200.

We will never proceed with additional work if it’s not approved. If something jumps out at us that we didn't anticipate, we will stop and discuss the best options to move forward.